If purchased with screws, we supply #2x3/8 flat head screws.

Each of our easel hinges was designed to ensure you'll receive the highest quality self-fastening hardware on the market.

In fact our innovative patented design has become the worldwide industry standard as an

alternative to the labor inte..]]> https://www.woodworkingparts.com/1-1-2-inch-re-enforcing-picture-frame-corner-angle/ Thu, 22 Jul 2010 22:15:14 +0000 https://www.woodworkingparts.com/1-1-2-inch-re-enforcing-picture-frame-corner-angle/

1-1/2" Metal Re-enforcing Corner Angle Picture Frame Plate

1-1/2 x 3/8 inch 4 hole zinc plated plates. A little smaller plate for smaller frames

Suggested size screw is #4x1/2

If purchased with screws, we will supply #4x1/2 zinc plated phillips flat head

Price: $0.24

1-1/2" Metal Re-enforcing Corner Angle Picture Frame Plate

1-1/2 x 3/8 inch 4 hole zinc plated plates. A little smaller plate for smaller frames

Suggested size screw is #4x1/2

If purchased with screws, we will supply #4x1/2 zinc plated phillips flat head

Price: $0.24

]]>

Choice of three sizes 3/8 x 3/16,  7/16 x 7/16 or 1 x 5/8

Another cool idea from FastCap, the Blind Nail System allows you to hold stuff together without any visible faste..]]> https://www.woodworkingparts.com/1-inch-flat-spear-turn-button-black-plated/ Tue, 24 Nov 2009 22:30:39 +0000 https://www.woodworkingparts.com/1-inch-flat-spear-turn-button-black-plated/

1 Inch Flat Spear Turn Button Black Plated

Turn buttons are black plated and 1 inch long.

If purchased with screws, we will supply #2x1/4 round head screws.

Price: $0.08

1 Inch Flat Spear Turn Button Black Plated

Turn buttons are black plated and 1 inch long.

If purchased with screws, we will supply #2x1/4 round head screws.

Price: $0.08

]]>

Turn buttons are brass plated and 1 inch long.

If purchased with screws, we will supply #2x1/4 round head screws.

1 inch

Manufacturer suggested screw is #2 to #6 that we also sell.

If you purchase the turn buttons with screws, we will supply #3x3/8 black plated phillips flat head screws

Tip is bent for easy turning. Recommended screw is #2 that we also sell

If with screws, we supply #2x1/4 Round head screws

2 x 3/8 inch 4 hole zinc plated plates. Suggested size screw is #6

If purchased with screws, we will supply #6x1/2 zinc plated phillips  flat head.

Brass Plated

Great Hanger for fastening wire to the back of picture frames

2 #6 screws per strap needed.

Total length 1-7/8" Width 1/2"

If you purchase them with screws, we will supply #6x1/2 Brass Plated Phillips pan head screws