Black Coated Large 2 Inch No Nail Sawtooth Hanger - For Hardwood

Special Hardened steel and shorter prong to use on Hardwoods.

Black Finish. No nails or screws needed. The size is 5/16 inches wide and 2 inch long

Price: $0.10

Black Self Fastening Sawtooth 2 1/4 Inch Picture Frame/Craft Hanger

• Total lenght is 2 1/4 inch
• Black plated
• Raised sawtooth for more space behind
• Use on hardboard, cardboard and other backing - NOT FOR USE WITH WOOD!
• Hangers wi..

  Price: $0.10

  ]]>

  Black Self Fastening Sawtooth 2 1/4 Inch Picture Frame/Craft Hanger

  • Total lenght is 2 1/4 inch
  • Black plated
  • Raised sawtooth for more space behind
  • Use on hardboard, cardboard and other backing - NOT FOR USE WITH WOOD!
  • Hangers wi..

    Price: $0.10

    ]]> Black Self Fastening Sawtooth 2 1/4 Inch Picture Frame/Craft Hanger
    • Total lenght is 2 1/4 inch
    • Black plated
    • Raised sawtooth for more space behind
    • Use on hardboard, cardboard and other backing - NOT FOR USE WITH WOOD!
    • Hangers wi..]]> https://www.woodworkingparts.com/triangle-hanger-for-small-screw-or-nails/ Thu, 29 Mar 2012 20:45:01 +0000 https://www.woodworkingparts.com/triangle-hanger-for-small-screw-or-nails/

      Triangle Hanger For Small Screw or Nails

      Triangle/D-Ring Hangers have a triangular head with 1 reduced-size hole for small screws.
      A #2 screw is what is recommeneded for this hanger if screw is what you prefer.
      We would supply #2x3/8 screw if purchased with s..

      Price: $0.08

      ]]>

      Triangle Hanger For Small Screw or Nails

      Triangle/D-Ring Hangers have a triangular head with 1 reduced-size hole for small screws.
      A #2 screw is what is recommeneded for this hanger if screw is what you prefer.
      We would supply #2x3/8 screw if purchased with s..

      Price: $0.08

      ]]> Triangle Hanger For Small Screw or Nails

      Triangle/D-Ring Hangers have a triangular head with 1 reduced-size hole for small screws.
      A #2 screw is what is recommeneded for this hanger if screw is what you prefer.
      We would supply #2x3/8 screw if purchased with s..]]> https://www.woodworkingparts.com/brass-plated-ridged-turn-buttons-3-4-inch/ Sat, 27 Aug 2011 14:12:35 +0000 https://www.woodworkingparts.com/brass-plated-ridged-turn-buttons-3-4-inch/

      Manufacturer suggested screw is #2 to #4 that we also sell.

      If purchased with screws, we supply #2x3/8 flat head screws.

      Price: $0.11

      ]]>

      Manufacturer suggested screw is #2 to #4 that we also sell.

      If purchased with screws, we supply #2x3/8 flat head screws.

      Price: $0.11

      ]]> Manufacturer suggested screw is #2 to #4 that we also sell.

      If purchased with screws, we supply #2x3/8 flat head screws.

      ]]> https://www.woodworkingparts.com/easel-back-hinges/ Sat, 25 Dec 2010 17:08:11 +0000 https://www.woodworkingparts.com/easel-back-hinges/

      Self Fastening Easel Back Hinges

      Each of our easel hinges was designed to ensure you'll receive the highest quality self-fastening hardware on the market.

      In fact our innovative patented design has become the worldwide industry standard as an

      alternative to the labor inte..

      Price: $0.25

      ]]>

      Self Fastening Easel Back Hinges

      Each of our easel hinges was designed to ensure you'll receive the highest quality self-fastening hardware on the market.

      In fact our innovative patented design has become the worldwide industry standard as an

      alternative to the labor inte..

      Price: $0.25

      ]]> Self Fastening Easel Back Hinges

      Each of our easel hinges was designed to ensure you'll receive the highest quality self-fastening hardware on the market.

      In fact our innovative patented design has become the worldwide industry standard as an

      alternative to the labor inte..]]> https://www.woodworkingparts.com/1-1-2-inch-re-enforcing-picture-frame-corner-angle/ Thu, 22 Jul 2010 22:15:14 +0000 https://www.woodworkingparts.com/1-1-2-inch-re-enforcing-picture-frame-corner-angle/

      1-1/2" Metal Re-enforcing Corner Angle Picture Frame Plate

      1-1/2 x 3/8 inch 4 hole zinc plated plates. A little smaller plate for smaller frames

      Suggested size screw is #4x1/2

      If purchased with screws, we will supply #4x1/2 zinc plated phillips flat head

      Price: $0.24

      ]]>

      1-1/2" Metal Re-enforcing Corner Angle Picture Frame Plate

      1-1/2 x 3/8 inch 4 hole zinc plated plates. A little smaller plate for smaller frames

      Suggested size screw is #4x1/2

      If purchased with screws, we will supply #4x1/2 zinc plated phillips flat head

      Price: $0.24

      ]]> 1-1/2" Metal Re-enforcing Corner Angle Picture Frame Plate

      1-1/2 x 3/8 inch 4 hole zinc plated plates. A little smaller plate for smaller frames

      Suggested size screw is #4x1/2

      If purchased with screws, we will supply #4x1/2 zinc plated phillips flat head

      ]]> https://www.woodworkingparts.com/black-plated-sawtooth-2-3-4-inch-picture-frame-craft-hanger-w-nails/ Fri, 09 Apr 2010 22:48:50 +0000 https://www.woodworkingparts.com/black-plated-sawtooth-2-3-4-inch-picture-frame-craft-hanger-w-nails/

      Black Plated Sawtooth Picture Hangers 2 3/4 inch W/Nails

      By special request, I have had the black sawtooth made for me as I can not find them made anywhere.

      The nails are zinc as I can not get the nails plated and the head is hardly seen. You could take a Q tip and just dab a ..

      Price: $0.09

      ]]>

      Black Plated Sawtooth Picture Hangers 2 3/4 inch W/Nails

      By special request, I have had the black sawtooth made for me as I can not find them made anywhere.

      The nails are zinc as I can not get the nails plated and the head is hardly seen. You could take a Q tip and just dab a ..

      Price: $0.09

      ]]> Black Plated Sawtooth Picture Hangers 2 3/4 inch W/Nails

      By special request, I have had the black sawtooth made for me as I can not find them made anywhere.

      The nails are zinc as I can not get the nails plated and the head is hardly seen. You could take a Q tip and just dab a ..]]> https://www.woodworkingparts.com/1-inch-flat-spear-turn-button-black-plated/ Tue, 24 Nov 2009 22:30:39 +0000 https://www.woodworkingparts.com/1-inch-flat-spear-turn-button-black-plated/

      1 Inch Flat Spear Turn Button Black Plated

      Turn buttons are black plated and 1 inch long.

      If purchased with screws, we will supply #2x1/4 round head screws.

      Price: $0.08

      ]]>

      1 Inch Flat Spear Turn Button Black Plated

      Turn buttons are black plated and 1 inch long.

      If purchased with screws, we will supply #2x1/4 round head screws.

      Price: $0.08

      ]]> 1 Inch Flat Spear Turn Button Black Plated

      Turn buttons are black plated and 1 inch long.

      If purchased with screws, we will supply #2x1/4 round head screws.

      ]]> https://www.woodworkingparts.com/black-plated-ridged-turn-button-1-inch/ Tue, 03 Nov 2009 17:11:23 +0000 https://www.woodworkingparts.com/black-plated-ridged-turn-button-1-inch/

      Ridged Turn Buttons

      1 inch

      Manufacturer suggested screw is #2 to #6 that we also sell.

      If you purchase the turn buttons with screws, we will supply #3x3/8 black plated phillips flat head screws

      Price: $0.09

      ]]>

      Ridged Turn Buttons

      1 inch

      Manufacturer suggested screw is #2 to #6 that we also sell.

      If you purchase the turn buttons with screws, we will supply #3x3/8 black plated phillips flat head screws

      Price: $0.09

      ]]> Ridged Turn Buttons

      1 inch

      Manufacturer suggested screw is #2 to #6 that we also sell.

      If you purchase the turn buttons with screws, we will supply #3x3/8 black plated phillips flat head screws

      ]]> https://www.woodworkingparts.com/5-8-turn-button-brass-plated/ Sun, 25 Oct 2009 21:31:27 +0000 https://www.woodworkingparts.com/5-8-turn-button-brass-plated/

      5/8 Turn Buttons Brass Plated

      Tip is bent for easy turning. Recommended screw is #2 that we also sell

      If with screws, we supply #2x1/4 Round head screws

      Price: $0.08

      ]]>

      5/8 Turn Buttons Brass Plated

      Tip is bent for easy turning. Recommended screw is #2 that we also sell

      If with screws, we supply #2x1/4 Round head screws

      Price: $0.08

      ]]> 5/8 Turn Buttons Brass Plated

      Tip is bent for easy turning. Recommended screw is #2 that we also sell

      If with screws, we supply #2x1/4 Round head screws

      ]]>